Ana içeriğe geç

Giriş

The “Free-Stand” button enables the stroller to fold into a freestanding, compact position. Sometimes the button can get stuck and requires simple internal repair. This guide will walk you through that process.

Parçalar

Hiçbir parça belirtilmedi.

  1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: adım 1, 2 resimden 1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: adım 1, 2 resimden 2.
    • Unscrew the two, 27mm Phillips #2 screws from the back of the “Free-Stand” button case.

    • You may want to flip the stroller over to access the screws.

  2. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 2, 1 resimden 1.
    • Remove the back cover of the case by lifting it straight up.

  3. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 3, 1 resimden 1.
    • The spring may pop out while removing the "Free Stand" button, so lift the button slowly to avoid losing the spring.

    • To access the spring, remove the red, "Free-Stand" button by lifting it straight up.

  4. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 4, 1 resimden 1.
    • If the spring does not come out when you remove the "Free-Stand" button, lift the spring out of the case so it can be fixed or replaced.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Christopher Peterson

Üyelik tarihi: 01-10-2015

330 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-1, Forte Fall 2015 Cal Poly, Team 11-1, Forte Fall 2015 üyesi

CPSU-FORTE-F15S11G1

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 20

Her zaman: 925