Eşyalarını Tamir Et Topluluk Mağaza

Kolcraft Cloud Plus "Free-Stand" Button Replacement

Giriş

The “Free-Stand” button enables the stroller to fold into a freestanding, compact position. Sometimes the button can get stuck and requires simple internal repair. This guide will walk you through that process.

Neye ihtiyacın var

  1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: adım 1, 2 resimden 1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: adım 1, 2 resimden 2.

    • Unscrew the two, 27mm Phillips #2 screws from the back of the “Free-Stand” button case.

    • You may want to flip the stroller over to access the screws.

    Düzenle

  2. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 2, 1 resimden 1.

    • Remove the back cover of the case by lifting it straight up.

    Düzenle

  4. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 3, 1 resimden 1.

    • The spring may pop out while removing the "Free Stand" button, so lift the button slowly to avoid losing the spring.

    • To access the spring, remove the red, "Free-Stand" button by lifting it straight up.

    Düzenle

  5. Kolcraft Cloud Plus "Free-Stand" Button Replacement: adım 4, 1 resimden 1.

    • If the spring does not come out when you remove the "Free-Stand" button, lift the spring out of the case so it can be fixed or replaced.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Christopher Peterson

Üyelik tarihi: 10/01/15

330 İtibar

3 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team 11-1, Forte Fall 2015 Cal Poly, Team 11-1, Forte Fall 2015 üyesi

CPSU-FORTE-F15S11G1

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 31

Her zaman: 1,271