Giriş

This guide will show you how to replace your broken screen.

Make sure to open the back cover easily using the plastic opening tool
  • Make sure to open the back cover easily using the plastic opening tool

Yorum Ekle

Remove back cover by prying away from the Kurio. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
  • Remove back cover by prying away from the Kurio.

  • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

Yorum Ekle

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.
  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

Yorum Ekle

After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.
  • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

  • All these screws are identical so don't worry if you get them out of order.

Yorum Ekle

Remove the plastic cover that is covering the camera area.
  • Remove the plastic cover that is covering the camera area.

Yorum Ekle

Separate the two halves of your Kurio Touch 4S and lay them besides each other.
  • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Yorum Ekle

Use Phillips # 1 screw to open the 4 screws on the motherboard.
  • Use Phillips # 1 screw to open the 4 screws on the motherboard.

  • Open the screws gently and do not apply too much force as you could damage the motherboard.

Yorum Ekle

Use the plastic opener to remove the battery.
  • Use the plastic opener to remove the battery.

Yorum Ekle

Use tweezers to remove the black tape that is attached to the motherboard.
  • Use tweezers to remove the black tape that is attached to the motherboard.

Yorum Ekle

Detach all the wire that are connected to the motherboard. Also remove the camera module and other components that are attached to the motherboard.
  • Detach all the wire that are connected to the motherboard.

  • Also remove the camera module and other components that are attached to the motherboard.

  • For more information on soldering Click here

Yorum Ekle

Remove the motherboard with the help of plastic opener.
  • Remove the motherboard with the help of plastic opener.

  • Detach the power plug before you remove the motherboard.

Yorum Ekle

Use the Plastic opener to remove the screen.
  • Use the Plastic opener to remove the screen.

  • Do not apply too much pressure as the front cover could be damaged.

Yorum Ekle

Use the soldering tool to remove the wire that is attached to the screen & the motherboard.
  • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

Yorum Ekle

Use tweezers to remove the screen from your Kurio Toich 4S.
  • Use tweezers to remove the screen from your Kurio Toich 4S.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Ali

Üyelik tarihi: 21-01-2015

163 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team 6-5, Brown Winter 2015 USF Tampa, Team 6-5, Brown Winter 2015 üyesi

USFT-BROWN-W15S6G5

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 7

Tüm Zamanlar: 1,110