Ana içeriğe geç

Giriş

The camera button on your Kyocera DuraForce Pro can be replaced with little effort and just two tools. This guide will show you how to remove the phone cover and detach the button so you can get back to snapping photos.

Parçalar

Hiçbir parça belirtilmedi.

  1. Flip phone on its back side. Remove the outer case by using the plastic opening tool. Remove the outer case by using the plastic opening tool.
    • Flip phone on its back side.

    • Remove the outer case by using the plastic opening tool.

  2. Remove the 8 screws with a JIS #0 screwdriver. Using the plastic opening tool, remove the cover that was being held in place by the screws. Using the plastic opening tool, remove the cover that was being held in place by the screws.
    • Remove the 8 screws with a JIS #0 screwdriver.

    • Using the plastic opening tool, remove the cover that was being held in place by the screws.

  3. Once accessible, buttons around the edge of the phone can be removed. They may even fall out on their own. Once accessible, buttons around the edge of the phone can be removed. They may even fall out on their own.
    • Once accessible, buttons around the edge of the phone can be removed. They may even fall out on their own.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Dylan Ulbricht

Üyelik tarihi: 08-10-2018

720 İtibar

5 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 292