Eşyalarını Tamir Et Topluluk Mağaza

Kyocera Echo Flash and Motherboard Replacement

Giriş

This guide gives instructions on how to replace the combined motherboard and flash component pieces. Care should be taken so as not to damage other portions of the circuit board.

Neye ihtiyacın var

  1. Kyocera Echo Flash and Motherboard Replacement, Battery: adım 1, 1 resimden 1.

    • Orient the phone so that the screen is face down.

    • Place one or both thumbs near the small arrow at the bottom of the phone and firmly push the cover up.

    Düzenle

  2. Kyocera Echo Flash and Motherboard Replacement: adım 2, 1 resimden 1.

    • Pull up on the back cover and lift the top to separate it from the phone.

    Düzenle

  3. Kyocera Echo Flash and Motherboard Replacement: adım 3, 1 resimden 1.

    • Pull the battery out of the device with a thin object such as your nail or credit card.

    Düzenle

  5. Kyocera Echo Flash and Motherboard Replacement, Flash and Motherboard: adım 4, 1 resimden 1.

    • Unscrew four 4.3mm Phillips #000 screws.

    Düzenle

  6. Kyocera Echo Flash and Motherboard Replacement: adım 5, 1 resimden 1.

    • Unscrew 2 Y1000 4.8 mm screws.

    Düzenle

  7. Kyocera Echo Flash and Motherboard Replacement: adım 6, 2 resimden 1. Kyocera Echo Flash and Motherboard Replacement: adım 6, 2 resimden 2.

    • Wedge a plastic opening tool under the black outer casing of the phone. Push the plastic opening tool down and outward while rotating the phone to pry the black outer casing off.

    • Do not apply too much pressure to the outer casing, as it could damage internal components.

    Düzenle

  8. Kyocera Echo Flash and Motherboard Replacement: adım 7, 1 resimden 1.

    • Wedge a plastic opening tool under the motherboard directly above the flash. Additionally, use a plastic opening tool to unhook corner labeled in a red square.

    Düzenle

  9. Kyocera Echo Flash and Motherboard Replacement: adım 8, 2 resimden 1. Kyocera Echo Flash and Motherboard Replacement: adım 8, 2 resimden 2.

    • Gently pull the motherboard out of its compartment.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Alex Kinstedt

Üyelik tarihi: 11/05/18

483 İtibar

4 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

IUPUI, Team S2-G6, Baechle Fall 2018 IUPUI, Team S2-G6, Baechle Fall 2018 üyesi

IUPUI-BAECHLE-F18S2G6

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 173