Skip to main content

Giriş

This guide will show you how to disassemble the Kyocera Hydro Life phone in order to replace the power button.

  1. Remove the back cover.
    • Remove the back cover.

    • Pry the cover upward from the gap above the charger port as displayed.

  2. Remove the battery.
    • Remove the battery.

  3. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  4. Use a PH00 screwdriver to remove the 6 screws from the mid-frame. Removing the screws too carelessly can result in them being damaged or stripped.
    • Use a PH00 screwdriver to remove the 6 screws from the mid-frame.

    • Removing the screws too carelessly can result in them being damaged or stripped.

  5. Remove the back panel trim.
    • Remove the back panel trim.

    • The back panel trim is fairly thin, be cautious when removing it.

  6. Remove the back panel.
    • Remove the back panel.

    • Pry off the 4 corners first.

  7. Remove the power button with the tweezers. Remove the power button with the tweezers.
    • Remove the power button with the tweezers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Haley Brown

Üyelik tarihi: 21-09-2018

183 Reputation

1 Kılavuz yazıldı

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65