Eşyalarını Tamir Et Topluluk Mağaza

Kyvol Cybovac L20 Sensor Replacement

Giriş

The sensor on the side of the Kyvol Cybovac L20 is designed to help with edge detection and prevent the vacuum from falling off any ledges. In event that this sensor malfunctions, start by wiping the sensor with a clean, dry cloth. If the problem persists, use this guide to replace the sensor.

Neye ihtiyacın var

  1. Kyvol Cybovac L20 Sensor Replacement, Battery: adım 1, 1 resimden 1.

    • Begin with the device laying on a flat surface with the power button facing up.

    Düzenle

  2. Kyvol Cybovac L20 Sensor Replacement: adım 2, 2 resimden 1. Kyvol Cybovac L20 Sensor Replacement: adım 2, 2 resimden 2.

    • Remove both of the side brushes.

    Düzenle

  3. Kyvol Cybovac L20 Sensor Replacement: adım 3, 1 resimden 1.

    • Use a Phillips #1 screwdriver to remove two 1 mm screws that secure the panel.

    • Remove the battery panel.

    Düzenle

  5. Kyvol Cybovac L20 Sensor Replacement: adım 4, 2 resimden 1. Kyvol Cybovac L20 Sensor Replacement: adım 4, 2 resimden 2.

    • Slightly lift the battery out of the compartment.

    • Disconnect the battery connector.

    • Completely remove the battery.

    Düzenle

  6. Kyvol Cybovac L20 Sensor Replacement, Sensor: adım 5, 1 resimden 1.

    • Remove the eight 12.2 mm Phillips screws.

    Düzenle

  7. Kyvol Cybovac L20 Sensor Replacement: adım 6, 3 resimden 1. Kyvol Cybovac L20 Sensor Replacement: adım 6, 3 resimden 2. Kyvol Cybovac L20 Sensor Replacement: adım 6, 3 resimden 3.

    • Lift the body away from the base and disconnect all connectors between the two halves.

    Düzenle

  8. Kyvol Cybovac L20 Sensor Replacement: adım 7, 1 resimden 1.

    • Remove the two 8 mm Phillips screws that secure the sensor.

    Düzenle

  9. Kyvol Cybovac L20 Sensor Replacement: adım 8, 2 resimden 1. Kyvol Cybovac L20 Sensor Replacement: adım 8, 2 resimden 2.

    • Use a spudger or your fingernails to gently walk the white connector directly out of its port.

    • Remove the sensor.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Brad

Üyelik tarihi: 04/01/24

397 İtibar

3 adet Kılavuz yazıldı

Rozetler: 3

Ekip

IUPUI, Team 1-1, Harley Spring 2024 IUPUI, Team 1-1, Harley Spring 2024 üyesi

IUPUI-HARLEY-S24S1G1

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 17

Her zaman: 44