Giriş

This repair guide will instruct the user on the proper technique for removing and replacing a broken keypad for a LG 1010 Cell Phone.

Turn off the cell phone and place face down on a flat surface.
  • Turn off the cell phone and place face down on a flat surface.

Yorum Ekle

While sliding the gray tab up, lift battery up and away from the cell phone.
  • While sliding the gray tab up, lift battery up and away from the cell phone.

Yorum Ekle

  • Remove battery and set aside.

Yorum Ekle

  • While holding cell phone firmly in one hand, unscrew and remove the antenna with the other hand.

Yorum Ekle

  • Pull the antenna housing (black tube) towards bottom of phone and remove.

Yorum Ekle

  • Unscrew the four screws on the back case using a T6 Torx Screwdriver.

Yorum Ekle

  • Pull the back cover straight off the phone using your thumb and forefinger.

Yorum Ekle

  • Pry off circuit board with a flathead screwdriver.

Yorum Ekle

  • Pull out flexible keypad.

Yorum Ekle

Sonuç

Install new keypad and reassemble following these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Nicholas Schmidt

Üyelik tarihi: 09-10-2010

97 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-25, Regan Fall 2010 Cal Poly, Team 3-25, Regan Fall 2010 üyesi

CPSU-REGAN-F10S3G25

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 774