Giriş

This guide will show you how to open up your Blu-ray player and remove the motherboard in order to replace various components of it or the whole unit.

Parçalar

Hiçbir parçaya gerek yok.

Ensure the device is unplugged to prevent shocks. Remove the three black 3/16” Phillips #2 screws from the backside of the player.
  • Ensure the device is unplugged to prevent shocks.

  • Remove the three black 3/16” Phillips #2 screws from the backside of the player.

  • With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.

Yorum Ekle

Unhinge the tabs that attach the front panel to the unit: Two tabs on the disc drive Two tabs on the left and right side of the player
  • Unhinge the tabs that attach the front panel to the unit:

    • Two tabs on the disc drive

    • Two tabs on the left and right side of the player

      • Be careful when handling these tabs. They are very fragile and can be easily broken.

    • Three tabs on the underside of the player

  • Pull panel away from case.

    • If the panel does not come off right away, be sure to check if tabs have inadvertently switched back to their locked position.

Yorum Ekle

Using your fingers, pull the three tape-like cables to disconnect the disc drive from the green motherboard.
  • Using your fingers, pull the three tape-like cables to disconnect the disc drive from the green motherboard.

Yorum Ekle

Remove the two black  3/16” Phillips #2 mounting screws from the left and right side of the disc drive. With the front side facing you lift the front of disc drive, slide it toward you and pull out to remove.
  • Remove the two black 3/16” Phillips #2 mounting screws from the left and right side of the disc drive.

  • With the front side facing you lift the front of disc drive, slide it toward you and pull out to remove.

Yorum Ekle

Detach the power supply cord from the brown motherboard by pushing the locking clip on the connector, and pulling out. The connector may be difficult to remove. Wiggling it while pulling out may help release it. Remove the power cord from the panel by carefully sliding it upwards from its seating.
  • Detach the power supply cord from the brown motherboard by pushing the locking clip on the connector, and pulling out.

    • The connector may be difficult to remove. Wiggling it while pulling out may help release it.

  • Remove the power cord from the panel by carefully sliding it upwards from its seating.

Yorum Ekle

Remove the two black 3/16” Phillips #2 screws from the backside of the player. One screw inbetween the audio/video jacks
  • Remove the two black 3/16” Phillips #2 screws from the backside of the player.

    • One screw inbetween the audio/video jacks

    • One screw to the bottom right of the audio/video jacks

  • With the backside facing you, pull the bottom of the panel towards you and lift to remove it.

Yorum Ekle

Handle the motherboards with care. They are fragile. Beware of the capacitors as they may shock you when touched.
  • Handle the motherboards with care. They are fragile.

  • Beware of the capacitors as they may shock you when touched.

  • Remove the the two silver 3/16” Phillips #2 screws from the green motherboard.

  • Remove the one black 3/16” Phillips #2 screw from the brown motherboard

  • Use both hands to carefully lift the motherboard unit away from the player.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Bart Quicho

Üyelik tarihi: 13-01-2015

448 İtibar

3 adet Kılavuz yazıldı

Takım

UW Tacoma, Team 1-1, Rose Winter 2015 UW Tacoma, Team 1-1, Rose Winter 2015 üyesi

UWT-ROSE-W15S1G1

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 Gün: 12

Son 30 Gün: 56

Her zaman: 1,834