Giriş

The back case of the phone holds the motherboard and back speaker. You need to disassemble the back to replace these items.

  1. On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.
    • On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.

    Yorum Ekle

  2. Lift and remove the battery.
    • Lift and remove the battery.

    Yorum Ekle

    • Remove the two screw covers at the top of phone with tweezers.

    Yorum Ekle

    • Remove the six Phillips #000 (3mm) screws.

    Yorum Ekle

    • Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.

    • The plastic side buttons fall out when you take the back cover off.

    • The back cover is connected to the speaker by red and black wires.

    Yorum Ekle

    • Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.

    • Set the back cover with the speaker aside.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kathrine Muirhead

Üyelik tarihi: 15-10-2013

347 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-27, Amido Fall 2013 Cal Poly, Team 4-27, Amido Fall 2013 üyesi

CPSU-AMIDO-F13S4G27

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 194