Giriş

How to remove the keypad from an LG CG180 cell phone.

Power down the cell phone by pressing and holding down the red "end call" button.
  • Power down the cell phone by pressing and holding down the red "end call" button.

Yorum Ekle

Turn the phone screen-down so you are looking at the back cover.
  • Turn the phone screen-down so you are looking at the back cover.

Yorum Ekle

Slide the back cover down using your finger to remove the cover from the phone. Slide the back cover down using your finger to remove the cover from the phone.
  • Slide the back cover down using your finger to remove the cover from the phone.

Yorum Ekle

Place your finger at the top of the battery in small gap.
  • Place your finger at the top of the battery in small gap.

Yorum Ekle

$79,00 ve üstü tüm sparişlerde ücretsiz nakliye.

Mağazamıza Göz Atın
MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Press downward while pulling outward to remove the battery.
  • Press downward while pulling outward to remove the battery.

Yorum Ekle

Remove all four screws on the back of the phone using a Phillips #00 screwdriver.
  • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

Yorum Ekle

Insert a plastic opening tool in the seam.
  • Insert a plastic opening tool in the seam.

Yorum Ekle

Run the tool along the seam to release all the tabs. Run the tool along the seam to release all the tabs.
  • Run the tool along the seam to release all the tabs.

Yorum Ekle

Pull the phone back cover off once all the tabs are released. Pull the phone back cover off once all the tabs are released.
  • Pull the phone back cover off once all the tabs are released.

Yorum Ekle

Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.
  • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

Yorum Ekle

The hardshell case is separated from the rest of the phone.
  • The hardshell case is separated from the rest of the phone.

Yorum Ekle

Separate keypad from circuit board by turning it upside down and allowing it to fall off. Separate keypad from circuit board by turning it upside down and allowing it to fall off.
  • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alex Jacobs

Üyelik tarihi: 21-01-2010

5 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 14-42, Regan Winter 2010 Cal Poly, Team 14-42, Regan Winter 2010 üyesi

CPSU-REGAN-W10S14G42

4 Üye

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Tüm Zamanlar: 1,312