Ana içeriğe geç

Giriş

The front housing is the glossy front cover of the phone which can get scratched easily.

  1. Insert one of the plastic opening tools between the silver and plastic black parts of the speaker at the top of the phone. Pry off the black plastic part to separate it from the silver part.
    • Insert one of the plastic opening tools between the silver and plastic black parts of the speaker at the top of the phone.

    • Pry off the black plastic part to separate it from the silver part.

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Use the screwdriver to remove four 3.0 mm Phillips #00 screws as shown.
    • Use the screwdriver to remove four 3.0 mm Phillips #00 screws as shown.

  4. Insert a the plastic opening tool in between the silver and black seam of the phone casing. Take off the front housing by running the plastic opening tool around the perimeter of the phone.
    • Insert a the plastic opening tool in between the silver and black seam of the phone casing.

    • Take off the front housing by running the plastic opening tool around the perimeter of the phone.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Zack Mintzer

Üyelik tarihi: 16-04-2013

1 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 21-55, Johann Spring 2013 Cal Poly, Team 21-55, Johann Spring 2013 üyesi

CPSU-JOHANN-S13S21G55

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 324