Eşyalarını Tamir Et Topluluk Mağaza

LG Flare Microphone Replacement

Giriş

This guide will show you how to take your LG Flare apart to reach the microphone and replace it.

If you find yourself having cell phone issues such as someone not being able to hear you during a phone call or audio recordings are not picking up any noise, you may have a broken microphone.

Neye ihtiyacın var

  1. LG Flare Microphone Replacement, Microphone: adım 1, 2 resimden 1. LG Flare Microphone Replacement, Microphone: adım 1, 2 resimden 2.

    • Remove the back cover by pressing on the top middle raised lines of the back cover and sliding the cover off.

    Düzenle

  2. LG Flare Microphone Replacement: adım 2, 1 resimden 1.

    • Remove the battery by popping the top out and removing the battery.

    Düzenle

  3. LG Flare Microphone Replacement: adım 3, 1 resimden 1.

    • Use appropriately sized Philips-head screwdriver to remove the six small screws on the back of the phone under the battery.

    Düzenle

  4. LG Flare Microphone Replacement: adım 4, 1 resimden 1.

    • Use an opening tool to pop the back panel apart around the edges, and then pry the whole piece off.

    Düzenle

  6. LG Flare Microphone Replacement: adım 5, 1 resimden 1.

    • Use an opening tool to separate the tabs on the green circuit board from the front body of the phone.

    Düzenle

  7. LG Flare Microphone Replacement: adım 6, 1 resimden 1.

    • Use an opening tool to pop the orange connecting strip off of the circuit board.

    Düzenle

  8. LG Flare Microphone Replacement: adım 7, 1 resimden 1.

    • Un-clip the 2 metal clips on one side of the circuit board.

    Düzenle

  9. LG Flare Microphone Replacement: adım 8, 2 resimden 1. LG Flare Microphone Replacement: adım 8, 2 resimden 2.

    • Using tweezers and wedge, remove silver piece from green circuit board.

    Düzenle

  10. LG Flare Microphone Replacement: adım 9, 1 resimden 1.

    • Remove the microphone (rip soldering).

    Düzenle

  11. LG Flare Microphone Replacement: adım 10, 1 resimden 1.

    • Solder new microphone in place OR buy replacement circuit board from www.ifixit.com and replace.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

Kelsey Hanna

Üyelik tarihi: 09/29/15

1 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Ohio State, Team 1-3, Garvin Fall 2015 Ohio State, Team 1-3, Garvin Fall 2015 üyesi

OSU-GARVIN-F15S1G3

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 175