Giriş

If the buckle or part of the wristband is damaged, it is a good idea to replace the bands on both sides so that they match.

Parçalar

Hiçbir parçaya gerek yok.

  1. Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.
    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

  2. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband. Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.
    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Deja Miller

Üyelik tarihi: 14-10-2014

450 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 2-5, Blackwell Fall 2014 USF Tampa, Team 2-5, Blackwell Fall 2014 üyesi

USFT-BLACKWELL-F14S2G5

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 647