Giriş

Many hardware repairs require access to the internal components of your phone. This guide will show you how to remove the back panel of your phone to access its internal hardware.

Flip your phone over and locate the battery cover.
  • Flip your phone over and locate the battery cover.

Yorum Ekle

Slide the cover downward to reveal the battery below.
  • Slide the cover downward to reveal the battery below.

Yorum Ekle

  • Place the plastic opening tool in the divet in the bottom left-hand corner.

  • Pry the battery upward to remove it.

Yorum Ekle

  • Unscrew the four 4.5mm screws using the Philips #00 screw driver.

Yorum Ekle

  • Wedge the plastic opening tool between the screen and the case.

  • Gently move the tool along the edge to loosen the screen from the casing. Repeat this for the entire outer edge of the screen.

    • You should not completely separate the screen from the case in this step.

Yorum Ekle

  • Flip your phone over to the battery side.

  • Push the plastic opening tool into the lower seam between the frame and front cover to separate the back panel.

    • Push the scroll wheel, located in the upper left corner, in while lifting the back cover off to prevent breaking it.

  • The volume, lock, and camera buttons are loose so don't lose them.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kimberly Kha

Üyelik tarihi: 16-04-2013

163 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 2-18, Maness Spring 2013 Cal Poly, Team 2-18, Maness Spring 2013 üyesi

CPSU-MANESS-S13S2G18

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 436