Ana içeriğe geç

Giriş

Use this guide to remove the speakers from the device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use the spudger to pry out the indicated rubber squares. Use the #0 Phillips screwdriver to take out the revealed screws. Use the #0 Phillips screwdriver to take out the revealed screws.
    • Use the spudger to pry out the indicated rubber squares.

    • Use the #0 Phillips screwdriver to take out the revealed screws.

  2. Carefully lodge the spudger between the face plate and the hinge mechanism. Gently pry the face plate until it releases from place holders. Gently pry the face plate until it releases from place holders.
    • Carefully lodge the spudger between the face plate and the hinge mechanism.

    • Gently pry the face plate until it releases from place holders.

  3. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  4. Using a spudger, detach the speakers from their place holders. Using a spudger, detach the speakers from their place holders.
    • Using a spudger, detach the speakers from their place holders.

  5. Using the spudger, pry between the speaker circuit board and base to detach with ease.
    • Using the spudger, pry between the speaker circuit board and base to detach with ease.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Harry Black

Üyelik tarihi: 20-04-2010

56 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 10-44, Garner Spring 2010 Cal Poly, Team 10-44, Garner Spring 2010 üyesi

CPSU-GARNER-S10S10G44

4 Üyeler

18 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,439