Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

LG Optimus L9 P769 Micro-USB Port Replacement

Yazan: Kayden G (ve 2 başka katılımcı)
  • Yorumlar: 0
  • Favoriler: 1

Zorluk

Orta

Adımlar

10

Gerekli Süre

20 dakika

Bölümler

1

İşaretler

0

Giriş

This guide will detail how to replace the Micro-USB Port on the LG Optimus L9 P769

  1. Power off the device and gently lift the battery cover off to access the battery

    • Power off the device and gently lift the battery cover off to access the battery

    Düzenle

  2. Lift and remove the battery from the notch in the edge of the battery compartment

    • Lift and remove the battery from the notch in the edge of the battery compartment

    Düzenle

  3. Remove all 10 of the 4.5mm screws that hold the back frame to the case of the phone using a PH000 screwdriver. Remove all 10 of the 4.5mm screws that hold the back frame to the case of the phone using a PH000 screwdriver.

    • Remove all 10 of the 4.5mm screws that hold the back frame to the case of the phone using a PH000 screwdriver.

    Düzenle

  4. Using a small prying tool, carefully remove the back frame by prying on the sides of the device. Do be careful when prying back frame and removing it as too much force may result in damaging the frame.

    • Using a small prying tool, carefully remove the back frame by prying on the sides of the device.

    • Do be careful when prying back frame and removing it as too much force may result in damaging the frame.

    Düzenle

  5. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al

  6. Remove both connections of the antenna by pulling up with tweezers Remove both connections of the antenna by pulling up with tweezers Remove both connections of the antenna by pulling up with tweezers

    • Remove both connections of the antenna by pulling up with tweezers

    Düzenle

  7. Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype

    • Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype

    Düzenle

  8. Detach module from motherboard using a prying tool

    • Detach module from motherboard using a prying tool

    Düzenle

  9. Remove 1.8mm screw to free Micro-USB module for removal using the PH000 headtype Remove 1.8mm screw to free Micro-USB module for removal using the PH000 headtype

    • Remove 1.8mm screw to free Micro-USB module for removal using the PH000 headtype

    Düzenle

  10. Use a small prying tool to detach the Micro-USB circuitry from the case of the phone Use a small prying tool to detach the Micro-USB circuitry from the case of the phone

    • Use a small prying tool to detach the Micro-USB circuitry from the case of the phone

    Düzenle

  11. Comparison showing the Micro-USB module against the empty phone casing

    • Comparison showing the Micro-USB module against the empty phone casing

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Kayden G

Üyelik tarihi: 01-03-2017

272 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Takım

IUPUI, Team S2-G1, Harley Spring 2017 IUPUI, Team S2-G1, Harley Spring 2017 üyesi

IUPUI-HARLEY-S17S2G1

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 257