Ana içeriğe geç

Giriş

This would be a prerequisite guide to some of the other guide (front camera, LCD screen, etc). Make sure to be working in a static-free environment or using an anti static wrist wrap to avoid damaging the motherboard. Make sure to be delicate in removing some of the parts as they are very fragile and easily damaged.

  1. Start by placing the device face down and remove the back cove. Remove the battery from the phone by lifting it using your finger or the prying tool Remove the battery from the phone by lifting it using your finger or the prying tool
    • Start by placing the device face down and remove the back cove.

    • Remove the battery from the phone by lifting it using your finger or the prying tool

  2. Remove all 10 of the 4.5mm Phillips screws that holds the back frame to the case of the phone Using a small plastic prying tool, carefully remove the back frame by prying on the sides of the device. Do be careful when prying back frame and removing it as too much force may result in damaging the frame.
    • Remove all 10 of the 4.5mm Phillips screws that holds the back frame to the case of the phone

    • Using a small plastic prying tool, carefully remove the back frame by prying on the sides of the device.

    • Do be careful when prying back frame and removing it as too much force may result in damaging the frame.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Using tweezers, pinch the sides of the antenna node and pull straight up. Using a small prying tool, carefully remove the ribbon cables attached to the motherboard. Using a small prying tool, carefully remove the ribbon cables attached to the motherboard.
    • Using tweezers, pinch the sides of the antenna node and pull straight up.

    • Using a small prying tool, carefully remove the ribbon cables attached to the motherboard.

  5. Using a spudger or small prying tool, lift up the motherboard from the chassis of the device. Using a spudger or small prying tool, lift up the motherboard from the chassis of the device.
    • Using a spudger or small prying tool, lift up the motherboard from the chassis of the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ammar Rizal

Üyelik tarihi: 01-03-2017

201 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S2-G1, Harley Spring 2017 IUPUI, Team S2-G1, Harley Spring 2017 üyesi

IUPUI-HARLEY-S17S2G1

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 5

Her zaman: 323