Eşyalarını Tamir Et Topluluk Mağaza

LG UD501KOJ5 Dehumidifier Sensor Replacement

Giriş

This guide will demonstrate how to safely replace a humidity sensor on your LG UD501KOJ5 dehumidifier.

Neye ihtiyacın var

  1. LG UD501KOJ5 Dehumidifier Sensor Replacement, Humidity Sensor: adım 1, 2 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement, Humidity Sensor: adım 1, 2 resimden 2.

    • Unplug the dehumidifier then put on work gloves to protect your hands.

    • Remove the water collection bucket and set it aside.

    • Remove the air filter from the bottom of the front grille.

    Düzenle

  2. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 2, 2 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 2, 2 resimden 2.

    • Using your Phillips #0 screwdriver, remove the two screws which are attached at the bottom of the front grille.

    • Lift the front grille up and off the front of the frame, carefully set it in front of the dehumidifier.

    • The control board wire harness is still attached to the back of the front grille.

    Düzenle

  4. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 3, 3 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 3, 3 resimden 2. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 3, 3 resimden 3.

    • Remove the screws that secure the back panel to the dehumidifier.

    • Carefully remove the back panel from the dehumidifier.

    • Remove the screws at the side.

    Düzenle

  5. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 4, 3 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 4, 3 resimden 2. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 4, 3 resimden 3.

    • Remove the screws located at both sides of the back panel.

    • Remove the screws on the top left and top right which are connected to the control box.

    • Carefully remove the outer case.

    Düzenle

  6. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 5, 3 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 5, 3 resimden 2. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 5, 3 resimden 3.

    • Disconnect the sensor wire harness from the electronic control board.

    • Disconnect the wire harness from the collection bucket float switch.

    • Pull the evaporator thermistor out of the copper sleeve on the side of the evaporator coil.

    Düzenle

  7. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 6, 2 resimden 1. LG UD501KOJ5 Dehumidifier Sensor Replacement: adım 6, 2 resimden 2.

    • Remove the humidity sensor from the evaporator fins.

    • Pull the sensor assembly out of the dehumidifier.

    • Remove any dust build-up with a dry cloth.

    • Push the new humidity sensor in place on the front of the evaporator fins.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Gabrielle Campbell

Üyelik tarihi: 05/12/21

133 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

York University, Team S1-G3, O'Regan Summer 2021 York University, Team S1-G3, O'Regan Summer 2021 üyesi

YORK-O'REGAN-SU21S1G3

1 Üye

1 Kılavuz yazıldı

Bir Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 10

Son 30 gün: 29

Her zaman: 1,840