Giriş

This guide illustrates how to replace the LG VX5300 keypad.

Carefully slide battery cover off in a downward direction. Using the plastic opening tool, remove the battery. Light force may be necessary. Using the plastic opening tool, remove the battery. Light force may be necessary.
  • Carefully slide battery cover off in a downward direction.

  • Using the plastic opening tool, remove the battery. Light force may be necessary.

Yorum Ekle

Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.
  • Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.

Yorum Ekle

Using the plastic opening tool, carefully lift the back cover off.
  • Using the plastic opening tool, carefully lift the back cover off.

Yorum Ekle

Mac RAM Kitleri
Mac'inizi hızlandırın. Hafızasını en yükseğe çıkar.
Mac RAM Kitleri
Mac'inize daha fazla bellek alın.
Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars. Look to the following photo for the location of the two sensor bars.
  • Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars.

  • Look to the following photo for the location of the two sensor bars.

  • Without disconnecting the orange wire, carefully flip the computer chip over and lay flat on the table, exposing the keypad.

Yorum Ekle

Carefully remove the keypad and replace with the new keypad. If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.
  • Carefully remove the keypad and replace with the new keypad.

  • If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

Yorum Ekle

Carefully set the computer chip back in place.
  • Carefully set the computer chip back in place.

Yorum Ekle

Place the back cover back on and secure it with the screws. Place the back cover back on and secure it with the screws.
  • Place the back cover back on and secure it with the screws.

Yorum Ekle

Insert the battery. Slide the back cover on the phone.
  • Insert the battery.

  • Slide the back cover on the phone.

Yorum Ekle

Bitiş Çizgisi

Ashley

Üyelik tarihi: 12-02-2013

9 İtibar

3 adet Kılavuz yazıldı

Takım

Ohio State, Team 1-1, Buehl Spring 2013 Ohio State, Team 1-1, Buehl Spring 2013 üyesi

OSU-BUEHL-S13S1G1

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 422