Giriş

These steps show how to remove the phone's front case. This allows access to many of the components located on the outer face of the phone.

  1. Remove the four grey plugs using either tweezers or a push pin.
    • Remove the four grey plugs using either tweezers or a push pin.

    Yorum Ekle

  2. Remove the four screws that are now exposed using a Phillips #00 screwdriver.
    • Remove the four screws that are now exposed using a Phillips #00 screwdriver.

    • Be sure to put the screws in a safe place as they are very small and easy to lose.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Once all the screws have been removed, use a plastic opener tool to pry the case from the rest of the phone.

    • Insert the opener tool into the seem between the case and the phone. Apply pressure to separate the two pieces.

    • Do this across the entire length of the seem until the case is no longer attached to the phone.

    Yorum Ekle

    • The case can now be removed and the interior of the front is accessible.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ryan Bishop

Üyelik tarihi: 17-04-2012

1 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-39, Regan Spring 2012 Cal Poly, Team 12-39, Regan Spring 2012 üyesi

CPSU-REGAN-S12S12G39

3 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 679