Giriş

This guide illustrates how to replace the keypad on the LG VX8350R.

Using your thumb, slide battery cover off in a downward direction.
  • Using your thumb, slide battery cover off in a downward direction.

Yorum Ekle

Place the plastic opening tool at the top of the battery and pry it out to remove. Set the battery aside.
  • Place the plastic opening tool at the top of the battery and pry it out to remove. Set the battery aside.

Yorum Ekle

  • With a Phillips #00 Screwdriver, remove the four screws in a counter-clockwise direction from the back cover. Set them aside on a surface where they won't roll away; these screws will be used in reassembly.

Yorum Ekle

  • Using the plastic opening tool, carefully pry off the back cover. You may need to use the opening tool around the entire edge of the back cover to remove completely.

    • You will have to use some force to remove the upper part of the back cover. Apply enough force to separate the pieces without cracking the back cover.

Yorum Ekle

  • Gently lift the green computer chip plate out of the way to expose the keypad.

  • The green computer chip plate cannot be completely removed. It is attached to the phone by a ribbon. Be careful not to break this ribbon when moving the green computer chip plate.

Yorum Ekle

  • Remove the keypad using your fingers and set aside.

Yorum Ekle

  • Align the small holes in the new keypad with the posts on the phone.

Yorum Ekle

  • When replacing the computer chip, the sensor bar for the volume button may pop out of place. If this occurs, gently push the bars back into place behind the buttons with your fingers.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Alex Goots

Üyelik tarihi: 24-09-2013

117 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 260