LG Watch Urbane Motherboard Replacement

Giriş

In order to replace your motherboard you are going to need the proper tools. There are screws that need to be unscrewed and components that need to be pried open carefully. The tools needed will be plastic opening tools, PH #000 screwdriver and tweezers. With these prepared everything should be ready to start the replacement of the motherboard for the LG Watch Urbane.

Neye ihtiyacın var

Adım 1 Battery

LG Watch Urbane Motherboard Replacement, Battery: adım 1, 2 resimden 1.

LG Watch Urbane Motherboard Replacement, Battery: adım 1, 2 resimden 2.

Bu adımda kullanılan alet:

Tweezers

$4.99

Satın Al

Push on the band in order to expose the pins
Using tweezers, remove the pins, one on each side, in order to only leave the face of the watch.

Düzenle

Adım 2

Using plastic opening tools, carefully pry open the back cover of the the watch.
Use the little hatch on the bottom portion of the watch in order to easily pry open the watch

Düzenle

Adım 3

LG Watch Urbane Motherboard Replacement: adım 3, 3 resimden 3.

Bu adımda kullanılan alet:

Magnetic Project Mat

$19.95

Satın Al

Using a PH000 screwdriver, remove the three screws in order to release the motherboard from the watch.
Do not lose the three screws! Keep them somewhere you will remember! A magnetic mat can help with this. Ifixit Magnetic Mat
Using plastic opening tools, remove the four connectors attached to the motherboard

Düzenle

Adım 4

LG Watch Urbane Motherboard Replacement: adım 4, 3 resimden 3.

Using the plastic opening tools, carefully lift up the motherboard.
IGNORE THIS STEP IF ONLY REMOVING MOTHERBOARD: Use the plastic opening tools to carefully remove the battery

Düzenle