Giriş

Removing the motherboard is for more serious problems or problems having to do with the screens. It can be tricky so be very careful.

Turn the phone over so the back side is facing you.
  • Turn the phone over so the back side is facing you.

Yorum Ekle

Placing your thumb on the bottom of the phone, apply pressure to the small ridge in the middle of the phone and push upward towards the camera. The back casing should slide off.
  • Placing your thumb on the bottom of the phone, apply pressure to the small ridge in the middle of the phone and push upward towards the camera.

  • The back casing should slide off.

Yorum Ekle

Using your index finger, pull the top of the battery out first. Place your finger at the top center of the battery in the gap that is provided. Then pull the battery towards yourself. The battery should easily fall out after the top of the battery has been pulled out.
  • Using your index finger, pull the top of the battery out first. Place your finger at the top center of the battery in the gap that is provided. Then pull the battery towards yourself.

  • The battery should easily fall out after the top of the battery has been pulled out.

Yorum Ekle

Unscrew the six 2.4mm Phillips #00 screws (three on the left and three on the right of the phone) to remove the inner back case. Unscrew the six 2.4mm Phillips #00 screws (three on the left and three on the right of the phone) to remove the inner back case.
  • Unscrew the six 2.4mm Phillips #00 screws (three on the left and three on the right of the phone) to remove the inner back case.

Yorum Ekle

Once all six screws are removed, use the plastic opening tool to carefully pry apart the inner back case. Push the plastic tool underneath the case. Carefully push upward, with the tool, while moving it around the case.
  • Once all six screws are removed, use the plastic opening tool to carefully pry apart the inner back case. Push the plastic tool underneath the case. Carefully push upward, with the tool, while moving it around the case.

Yorum Ekle

Remove the camera, lock, and volume buttons from the side of the phone. Remove the camera, lock, and volume buttons from the side of the phone.
  • Remove the camera, lock, and volume buttons from the side of the phone.

Yorum Ekle

Carefully remove the two  3mm Phillips #00 screws (one on the top and one on the bottom) that are attaching the motherboard to the phone. Carefully remove the two  3mm Phillips #00 screws (one on the top and one on the bottom) that are attaching the motherboard to the phone.
  • Carefully remove the two 3mm Phillips #00 screws (one on the top and one on the bottom) that are attaching the motherboard to the phone.

Yorum Ekle

For this next step, carefully lift and remove the motherboard. A connector cable will still be connected to the motherboard upon removing it.
  • For this next step, carefully lift and remove the motherboard.

    • A connector cable will still be connected to the motherboard upon removing it.

    • Damage to the connector cable will permanently disable phone.

Yorum Ekle

Carefully unclip the silver metallic tab from the motherboard. Carefully unclip the silver metallic tab from the motherboard.
  • Carefully unclip the silver metallic tab from the motherboard.

Yorum Ekle

Once the cable is removed, you have successfully disassembled the motherboard of your phone. Once the cable is removed, you have successfully disassembled the motherboard of your phone.
  • Once the cable is removed, you have successfully disassembled the motherboard of your phone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Micaela Saqui

Üyelik tarihi: 19-04-2012

39 İtibar

14 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-41, Regan Spring 2012 Cal Poly, Team 9-41, Regan Spring 2012 üyesi

CPSU-REGAN-S12S9G41

5 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Tüm Zamanlar: 969