Remove the two plastic screw covers below the inside phone screen.
  • Remove the two plastic screw covers below the inside phone screen.

Yorum Ekle

Unscrew both screws using a Torx T6 screwdriver.
  • Unscrew both screws using a Torx T6 screwdriver.

Yorum Ekle

  • Pry off the screen front cover with a 3mm flathead screwdriver.

Yorum Ekle

  • Pry off the speaker, which is glued onto the front cover, using a small flathead screwdriver.

Yorum Ekle

  • Unsolder the black and red wires of the speaker from where they are attached to the base of the screen.

Yorum Ekle

  • Obtain replacement speaker and solder the new black and red wires back to the base of the screen.

Yorum Ekle

  • Apply glue to the back of the speaker and place it back in its original position.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Nicholas Schmidt

Üyelik tarihi: 09-10-2010

97 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-25, Regan Fall 2010 Cal Poly, Team 3-25, Regan Fall 2010 üyesi

CPSU-REGAN-F10S3G25

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 721