Eşyalarını Tamir Et Topluluk Mağaza

LaCie Rugged USB-C Circuit Board Replacement

Neye ihtiyacın var

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: adım 1, 3 resimden 1. LaCie Rugged USB-C Circuit Board Replacement, Overview: adım 1, 3 resimden 2. LaCie Rugged USB-C Circuit Board Replacement, Overview: adım 1, 3 resimden 3.

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Düzenle

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: adım 2, 2 resimden 1. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: adım 2, 2 resimden 2.

    • Remove the rubber case around the drive. You can just stretch it off.

    Düzenle

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: adım 3, 2 resimden 1. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: adım 3, 2 resimden 2.

    • Remove these 4x Torx T8 screws

    Düzenle

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: adım 4, 2 resimden 1. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: adım 4, 2 resimden 2.

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Düzenle

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: adım 5, 2 resimden 1. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: adım 5, 2 resimden 2.

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Düzenle

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: adım 6, 1 resimden 1.

    • Pull the drive gently out of the SATA connector.

    Düzenle

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: adım 7, 1 resimden 1.

    • Remove this Phillips 00 screw from the board.

    Düzenle

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: adım 8, 1 resimden 1.

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

9021007

Üyelik tarihi: 07/13/18

4.599 İtibar

25 adet Kılavuz yazıldı

Rozetler: 22

+19 tane daha rozet

3 Yorum

Where can i get a new board? thank you

Bar Avraham - Yanıt

Yes, where can we find a new board?

Vassilis Trigkas - Yanıt

Right, where can the part be purchased?????

James Causey - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 20

Son 30 gün: 66

Her zaman: 1,441