Eşyalarını Tamir Et Topluluk Mağaza

LeapFrog Scribble and Write Speaker Replacement

Giriş

This guide is for those who are looking to replace their Scribble and Write’s speaker due to muffled or distorted sounds. Familiarity with soldering is necessary in being able to replace the speaker. Please be sure to follow each and every step to avoid mishaps and causing further damage to the toy.

For more information on how to solder and desolder connections, please visit this guide.

Neye ihtiyacın var

  1. LeapFrog Scribble and Write Speaker Replacement, Speaker: adım 1, 1 resimden 1.

    • Turn your toy over so that the back is facing upward.

    Düzenle

  2. LeapFrog Scribble and Write Speaker Replacement: adım 2, 1 resimden 1.

    • Using a Phillips #00 screwdriver, unscrew all circled areas.

    Düzenle

  4. LeapFrog Scribble and Write Speaker Replacement: adım 3, 1 resimden 1.

    • Very carefully, remove the back case to reveal the contents of the toy.

    Düzenle

  5. LeapFrog Scribble and Write Speaker Replacement: adım 4, 1 resimden 1.

    • Using a Phillips #00 screwdriver, remove the screw highlighted in the image.

    Düzenle

  6. LeapFrog Scribble and Write Speaker Replacement: adım 5, 1 resimden 1.

    • Un-solder the wiring from the speaker and motherboard.

    • Caution: Be careful when using a soldering iron. Improper usage may result in burns.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

7 tane daha katılımcı ile

Anthony Kidd

Üyelik tarihi: 02/10/16

256 İtibar

2 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

USF Tampa, Team 1-5, Nance Spring 2016 USF Tampa, Team 1-5, Nance Spring 2016 üyesi

USFT-NANCE-S16S1G5

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 714