Ana içeriğe geç

Giriş

This is a guide made to show how to replace the RAM in a Lenovo Edge Thinkpad E431.

  1. Close the device and remove all power cables.
    • Close the device and remove all power cables.

    • Lay the laptop flat with the bottom facing upwards.

  2. Remove the four 2mm Phillips #00 screws from the bottom panel.
    • Remove the four 2mm Phillips #00 screws from the bottom panel.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the back panel of the device. Remove the back panel of the device.
    • Remove the back panel of the device.

  5. Using your fingers, spread the clips away from the RAM module.
    • Using your fingers, spread the clips away from the RAM module.

    • The RAM should "pop" out of its socket.

  6. Pull the RAM out at a 30 degree angle. Pull the RAM out at a 30 degree angle.
    • Pull the RAM out at a 30 degree angle.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Nathan Behan

Üyelik tarihi: 14-02-2018

369 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team S3-G3, Nance Spring 2018 USF Tampa, Team S3-G3, Nance Spring 2018 üyesi

USFT-NANCE-S18S3G3

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 150