Lenovo G40-30 Keyboard Replacement

Giriş

Replacing the keyboard is a quick and easy task. Removing the keyboard only took three tools: A JIS #1 screwdriver, plastic opening tool, and tweezers. Before you start make sure you remove the battery and unplug the device.

Neye ihtiyacın var

Adım 1 Battery

Lenovo G40-30 Keyboard Replacement, Battery: adım 1, 3 resimden 1.

Lenovo G40-30 Keyboard Replacement, Battery: adım 1, 3 resimden 2.

Lenovo G40-30 Keyboard Replacement, Battery: adım 1, 3 resimden 3.

At the top of the laptop you will see two switches, like in image one and two.
Pull the switches outwards with your thumb, towards the unlocked lock.

Düzenle

Adım 2

Lenovo G40-30 Keyboard Replacement: adım 2, 3 resimden 3.

Once both switches are pulled, the battery should pop out.

Düzenle

Adım 3

Now you are ready to insert your new battery.

Düzenle

Adım 4 Keyboard

Lenovo G40-30 Keyboard Replacement, Keyboard: adım 4, 2 resimden 1.

Lenovo G40-30 Keyboard Replacement, Keyboard: adım 4, 2 resimden 2.

Use a JIS #1 screwdriver to remove the two 7 mm screws.

Düzenle

Adım 5

Remove the back panel by sliding it away from the battery.

Düzenle

Adım 6

Use a JIS #1 screwdriver to remove the three 7 mm screws.

Düzenle

Adım 7

Wedge the plastic opening tool in-between the keyboard and the base of the laptop.
Continue using the plastic opening tool to pry around the edge until the keyboard is completely freed form the frame.
The keyboard should only be connected by a ribbon on the underside of the keyboard.
It is recommended that you slowly pull the keyboard out as your move around the edge. As in picture 2.
Be careful not to pull the keyboard too far away from the face as it will damage the data ribbon.