Parçalar

Hiçbir parçaya gerek yok.

Lay the computer down on its side as shown.
  • Lay the computer down on its side as shown.

  • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

Yorum Ekle

Gently slide the side panel straight back and remove from the computer.
  • Gently slide the side panel straight back and remove from the computer.

Yorum Ekle

Unplug both sets of wires attaching the power supply unit to the motherboard. The largest connection requires a significant amount of force to be removed.
  • Unplug both sets of wires attaching the power supply unit to the motherboard.

  • The largest connection requires a significant amount of force to be removed.

Yorum Ekle

Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive.
  • Unplug all cords attached to the optical drive and hard drive.

Yorum Ekle

Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.
  • Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.

Yorum Ekle

Remove the power supply unit by pulling away from the screw side and then out.
  • Remove the power supply unit by pulling away from the screw side and then out.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Timothy Grebe

Üyelik tarihi: 19-10-2014

1.327 İtibar

9 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-39, Amido Fall 2014 Cal Poly, Team 10-39, Amido Fall 2014 üyesi

CPSU-AMIDO-F14S10G39

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 8

Son 30 Gün: 74

Tüm Zamanlar: 1,967