Ana içeriğe geç

Giriş

Replacing the battery on the Lenovo Ideapad Flex4-1130 is a relatively simple task with minimal risk of damaging the device. The battery might need replacement if your device is unable to remain on for very long even after being fully charged.

  1. Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
    • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

    • Remove the ten 4mm screws from the back panel.

  2. Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
    • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

    • Do not insert the spudger too deep! This could potentially damage a device part.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the connector attaching the battery to the motherboard.
    • Remove the connector attaching the battery to the motherboard.

  5. Remove the four 4mm screws on the battery.
    • Remove the four 4mm screws on the battery.

  6. Lift the battery with a spudger and remove.
    • Lift the battery with a spudger and remove.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

Üyelik tarihi: 15-02-2018

677 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team S17-G5, Boczar Spring 2018 USF Tampa, Team S17-G5, Boczar Spring 2018 üyesi

USFT-BOCZAR-S18S17G5

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 12

Son 30 Gün: 50

Her zaman: 325