Eşyalarını Tamir Et Topluluk Mağaza

Lenovo IdeaPad Flex 5-1470 Motherboard Replacement

Giriş

This is a guide for how to replace a Lenovo IdeaPad Flex 5-1470 motherboard. Common reasons to replace the motherboard are because of overheating, power surges, old age or just overuse.

Neye ihtiyacın var

  1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Back Panel: adım 1, 1 resimden 1.

    • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

    Düzenle

  2. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 2, 2 resimden 1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 2, 2 resimden 2.

    • Use the plastic opening tool to lift up and remove the casing.

    Düzenle

  4. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, SSD: adım 3, 1 resimden 1.

    • Remove the single 3.6 mm screw using a Phillips #00 screwdriver.

    • The SSD will pop up on its own after removing the screw.

    Düzenle

  5. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: adım 4, 3 resimden 1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: adım 4, 3 resimden 2. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: adım 4, 3 resimden 3.

    • Use a Phillips #00 screwdriver to remove the three screws securing the fan.

    • Lift the fan up and out.

    • Use a Phillips #00 screwdriver to remove the three screws securing the hard drive.

    • Lift the hard drive up and out.

    Düzenle

  6. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 5, 2 resimden 1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 5, 2 resimden 2.

    • Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.

    • The Wi-Fi card will slightly lift away from the motherboard.

    • Pull the Wi-Fi card directly out of its port.

    Düzenle

  7. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 6, 2 resimden 1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: adım 6, 2 resimden 2.

    • Use a Phillips #00 screwdriver to remove the three screws securing the motherboard.

    • Gently disconnect the cables and ribbon cables connected to the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 20

Her zaman: 396