Parçalar

Hiçbir parçaya gerek yok.

  1. Remove three screws on bottom of case. They have a little keyboard image next to them. If you don't do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.
    • Remove three screws on bottom of case. They have a little keyboard image next to them. If you don't do this first, the keyboard will not come off. Place the plastic spudger right under the edge of the keyboard and lift up the keyboard.

  2. Slowly and gently lift the keyboard up to separate from the chassis.
    • Slowly and gently lift the keyboard up to separate from the chassis.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Gently lift the keyboard off the chassis.
    • Gently lift the keyboard off the chassis.

    • Carefully disconnect the keyboard from the laptop by unhooking the keyboard ribbon.

  5. Now remove the keyboard from the computer.
    • Now remove the keyboard from the computer.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Christopher

Üyelik tarihi: 08-04-2014

666 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-7, Regan Spring 2014 Cal Poly, Team 8-7, Regan Spring 2014 üyesi

CPSU-REGAN-S14S8G7

5 Üyeler

10 adet Kılavuz yazıldı

Bir Yorum

WARNING!!!!!!

These steps do not include removing the three screws that secure the keyboard to the bottom of the latop!!! They are marked with tiny keyboard icons. One is under the bottom panel, so that has to be removed first.

Clint Hatchett - Yanıt

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 11

Her zaman: 1,540