Parçalar

Hiçbir parçaya gerek yok.

  1. Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
    • Using the metal spudger, remove all the rubber squares on the bottom of the laptop.

  2. Remove the three 6 mm Phillips #1 screws  holding the panel on the laptop.
    • Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.

    • Pry the panel from the laptop using your hands or the metal spudger if necessary.

    • Using your hands, gently press on the two clips parallel to the sides of the RAM.

    • Remove RAM from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Destiny

Üyelik tarihi: 18-09-2018

109 İtibar

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 32

Her zaman: 51