Ana içeriğe geç

Giriş

The network adapter is attached to the motherboard on this device. The back panel of the device must be removed to reach the adapter.

  1. Remove all of the screws on the back panel with a Phillips #000 screwdriver. Turn over the device and remove the two screws on the outside of the hinges. Turn over the device and remove the two screws on the outside of the hinges.
    • Remove all of the screws on the back panel with a Phillips #000 screwdriver.

    • Turn over the device and remove the two screws on the outside of the hinges.

  2. Use a  pry tool or iFixIt Opening tool to separate the back panel from the device. Lift the back panel straight up to remove.
    • Use a pry tool or iFixIt Opening tool to separate the back panel from the device.

    • Lift the back panel straight up to remove.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter. Remove the black and white wires that attach the fan to the network adapter.
    • Remove the black and white wires that attach the fan to the network adapter.

  5. Remove the two screws attaching the network adapter to the motherboard. Remove the network adapter by sliding it down out of its connector.
    • Remove the two screws attaching the network adapter to the motherboard.

    • Remove the network adapter by sliding it down out of its connector.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rebekah Harmon

Üyelik tarihi: 23-01-2018

108 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 5

Son 30 Gün: 8

Her zaman: 70