Ana içeriğe geç

Lenovo Ideapad 110S-11IBR Thermal paste Replacement

Neye ihtiyacın var

  1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement, Battery: adım 1, 1 resimden 1.
    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

  2. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 2, 2 resimden 1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 2, 2 resimden 2.
    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 3, 2 resimden 1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 3, 2 resimden 2.
    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

  4. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 4, 1 resimden 1.
    • Remove the five 4 mm Phillips screws securing the battery.

  5. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 5, 2 resimden 1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: adım 5, 2 resimden 2.
    • Lift the battery up and out of the device.

    • once the battery is removed unscrew the coldplate and pull it free from the mainboard.

    • Using Isopropyl alcohol and a microfiber cloth, wipe away the old thermal compound, make sure to clean the coldplate and CPU die.

    • apply about half a gram of non-conductive thermal compound to the heat spreader of the CPU and replace the coldplate pressing down gently.

Sonuç

To reassemble your device, follow these instructions in reverse order.

[deleted]

Üyelik tarihi: 08/14/21

355 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 195