Ana içeriğe geç

Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement

Neye ihtiyacın var

  1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, Battery: adım 1, 1 resimden 1.
    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

  2. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 2, 2 resimden 1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 2, 2 resimden 2.
    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 3, 2 resimden 1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 3, 2 resimden 2.
    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

  4. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 4, 1 resimden 1.
    • Remove the five 4 mm Phillips screws securing the battery.

  5. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 5, 2 resimden 1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 5, 2 resimden 2.
    • Lift the battery up and out of the device.

  6. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: adım 6, 2 resimden 1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: adım 6, 2 resimden 2.
    • Unscrew the three 4 mm Phillips screws.

  7. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 7, 2 resimden 1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 7, 2 resimden 2.
    • Unlatch and remove the ribbon cable.

    • Ribbon cables can be fragile, so avoid excessively bending it.

  8. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: adım 8, 1 resimden 1.
    • Remove the card from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 1,657