Giriş

This guide will show you how to disassemble the back panel for the device.

This guide is also a prerequisite guide for other hardware part replacement.

  1. Before you proceed, make sure your computer is turned off and is not connected to any power source.
    • Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Orient the laptop in such a way that the bottom is facing up and the optical drive is facing to the left of yourself.

  2. Remove the 7mm Phillips #1 screw.
    • Remove the 7mm Phillips #1 screw.

    • Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

    • Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

    • Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

    • Use an opening tool to pry out the back cover.

    • Remove the back panel by pulling it up and away from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Anurag Deb

Üyelik tarihi: 31-10-2018

313 İtibar

3 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 10

Son 30 Gün: 35

Her zaman: 74