Ana içeriğe geç

Giriş

This guide is a starting point to begin replacing or fixing the other components within. It can also be used to replace the back cover if necessary.

Parçalar

Hiçbir parça belirtilmedi.

  1. Ensure the device is powered off.
    • Ensure the device is powered off.

    • Use a PZ00 screwdriver bit to remove the eleven screws securing the back cover.

    • Five 7 mm screws

    • Six 4 mm screws

  2. Carefully pry the back cover off the computer using an opening pick. Start at the corner of the laptop and work your way around the side. Gently pull up on the cover until it detaches.
    • Carefully pry the back cover off the computer using an opening pick.

    • Start at the corner of the laptop and work your way around the side. Gently pull up on the cover until it detaches.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nick Herzig

Üyelik tarihi: 10-02-2020

232 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team S7-G1, Regan Winter 2020 Cal Poly, Team S7-G1, Regan Winter 2020 üyesi

CPSU-REGAN-W20S7G1

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 24