Eşyalarını Tamir Et Topluluk Mağaza

Lenovo ThinkPad Yoga 370 Screen Replacement

Giriş

The screen is a crucial part of a laptop. A screen that is damaged and broken can cause many problems in the display of information. Follow this guide to learn how to replace the screen on a Lenovo Thinkpad Yoga 370.

Before beginning this repair, power off your device and unplug from your power adapter.

Neye ihtiyacın var

  1. Lenovo ThinkPad Yoga 370 Screen Replacement, Screen: adım 1, 1 resimden 1.

    • Remove rubber plugs on the lower corners of the screen

    • Unscrew screws under the rubber plugs

    Düzenle

  2. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 2, 2 resimden 1. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 2, 2 resimden 2.

    • Remove the four 4 mm screws along the bottom of the display.

    Düzenle

  4. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 3, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using tweezers, remove the tape from the display cable below the screen.

    Düzenle

  5. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 4, 1 resimden 1.

    • Slide the screen downwards towards the keyboard.

    • Lift the screen slowly from the frame when the screen is slid down completely.

    • The screen is still attached to the computer, do not pull away from the laptop frame until a later step.

    • Flip the screen over and lay face down on the keyboard.

    Düzenle

  6. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 5, 3 resimden 1. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 5, 3 resimden 2. Lenovo ThinkPad Yoga 370 Screen Replacement: adım 5, 3 resimden 3.

    • Peel the tape off from the back of the screen, connecting the display to the device.

    • Remove the screen.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Bir Yorum

I strongly recommend to at least unplug the battery before replacing the screen. I fried a motherboard once by manipulating a screen ribbon while the battery was still plugged in.

You should always unplug the battery before working on a device anyway.

lululock - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 21

Son 30 gün: 85

Her zaman: 2,160