Ana içeriğe geç

Giriş

Is your laptop heating up too quickly or making loud noises? Consider using this guide to replace the fan in your device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Make sure to power down and turn off your device before proceeding with the repair. Flip your laptop over so that the backside is facing you.
    • Make sure to power down and turn off your device before proceeding with the repair.

    • Flip your laptop over so that the backside is facing you.

  2. Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
    • Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.

    • Don’t try to force screws which won't come out. They are held in place by a stopper on the reverse side. This will not prevent you from removing the backplate.

  3. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.
    • Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.

  4. Remove the back panel from the device.
    • Remove the back panel from the device.

  5. Use the Phillips #1 screwdriver to remove the four screws holding in the fan assembly. Use the Phillips #1 screwdriver to remove the four screws holding in the fan assembly.
    • Use the Phillips #1 screwdriver to remove the four screws holding in the fan assembly.

  6. Lift the fan out of it's compartment to gain access to the cable connection, firmly grab the cable and pull it out of it's housing. Lift the fan out of it's compartment to gain access to the cable connection, firmly grab the cable and pull it out of it's housing. Lift the fan out of it's compartment to gain access to the cable connection, firmly grab the cable and pull it out of it's housing.
    • Lift the fan out of it's compartment to gain access to the cable connection, firmly grab the cable and pull it out of it's housing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Terelle Montalvo

Üyelik tarihi: 22-10-2018

1.246 İtibar

8 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team S1-G5, Simcock Fall 2018 UMass Dartmouth, Team S1-G5, Simcock Fall 2018 üyesi

UMASSD-SIMCOCK-F18S1G5

3 Üyeler

8 adet Kılavuz yazıldı

4 Yorum

It would be helpful to have something about the fan too!

Where to get it, or at least the model number!

Iraj V - Yanıt

What about thermal grease?

Oscar Desmonteix - Yanıt

Useless info. This is the heatsink (with fan) replacement, NOT fan replacement. The poster is a moron.

Victor Song - Yanıt

Victor - The fan and heatsink are attached to one another. How would you propose one replace the fan only? If you have a method, please create your own guide if this one was authored by such a “moron”. Jeez.

tomwedell -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 39

Son 30 gün: 121

Her zaman: 3,347