1. Start by removing the button covers by prying them off.
    • Start by removing the button covers by prying them off.

  2. Next Remove the two screw found under the buttons.
    • Next Remove the two screw found under the buttons.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Using a plastic spudger carefully pry open the the outer perimeter of the tablet.
    • Using a plastic spudger carefully pry open the the outer perimeter of the tablet.

  5. Next remove the ribbon cable  lift up the tab on the back end and slide it out. Only the back side of the cable has been removed—the other can remain connected.
    • Next remove the ribbon cable lift up the tab on the back end and slide it out.

    • Only the back side of the cable has been removed—the other can remain connected.

  6. Remove this screw and lift out the whole assembly. Remove this screw and lift out the whole assembly. Remove this screw and lift out the whole assembly.
    • Remove this screw and lift out the whole assembly.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 62