Ana içeriğe geç

Giriş

This guide will help you replace the hard drive of your device. You'll need to spend some time unscrewing a numerous amount of schools from the device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Flip the device so the back is facing you.
    • Flip the device so the back is facing you.

    • Using the Phillips #0 screwdriver, unscrew the fourteen screws from the device.

  2. Use the blue Opening Tool to pry-open the back cover.
    • Use the blue Opening Tool to pry-open the back cover.

    • Slide it around the perimeter of the PC freeing the back cover.

    • Remove the back cover from the device.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Use the Phillips #0 screwdriver to unscrew the four screws.
    • Use the Phillips #0 screwdriver to unscrew the four screws.

  5. Disconnect the hard drive from the motherboard.
    • Disconnect the hard drive from the motherboard.

  6. Use the Phillips #0 screwdriver to unscrew the four screws on the sides of the hard drive frame.
    • Use the Phillips #0 screwdriver to unscrew the four screws on the sides of the hard drive frame.

    • Remove the hard drive from the frame.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 12

Son 30 Gün: 48

Her zaman: 420