Giriş

Sound is an integral part of a laptop user's experience, especially for videos, music, and gaming. The Lenovo Y50-70 Touch is equipped with two side speakers and a bass speaker on the underside of the laptop. When there are sound problems, but all the sound drivers are running properly, replace the speakers to regain your full user experience.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove all twelve 6 mm screws from the back of the laptop using a Phillips #1 screwdriver. Apply a lot of pressure to prevent the screws from stripping.
    • Remove all twelve 6 mm screws from the back of the laptop using a Phillips #1 screwdriver.

      • Apply a lot of pressure to prevent the screws from stripping.

      • Make sure to turn off the computer first!

  2. Gently pull the back cover off the laptop. It should come off easily. Gently pull the back cover off the laptop. It should come off easily.
    • Gently pull the back cover off the laptop. It should come off easily.

  3. Remove the three 3.5 mm screws from the fan with a Philips #1 screwdriver. Remove the three 3.5 mm screws from the fan with a Philips #1 screwdriver.
    • Remove the three 3.5 mm screws from the fan with a Philips #1 screwdriver.

  4. Pull the wire tabs up one at a time to separate them from the motherboard. Do not pull too hard on the wire tabs.  It may damage the connection between the wires and motherboard. Do not pull too hard on the wire tabs.  It may damage the connection between the wires and motherboard.
    • Pull the wire tabs up one at a time to separate them from the motherboard.

      • Do not pull too hard on the wire tabs. It may damage the connection between the wires and motherboard.

  5. Remove the black and white antenna cables from the wireless card. Do not pull too hard on the antenna cables, as it might damage the connection to the wireless card. Do not pull too hard on the antenna cables, as it might damage the connection to the wireless card.
    • Remove the black and white antenna cables from the wireless card.

      • Do not pull too hard on the antenna cables, as it might damage the connection to the wireless card.

  6. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  7. Lift up the fan slightly. Gather the antenna cables(black and white) and speaker wires (red, black, blue, and white). Carefully move them away from the fan. Gather the antenna cables(black and white) and speaker wires (red, black, blue, and white). Carefully move them away from the fan.
    • Lift up the fan slightly.

    • Gather the antenna cables(black and white) and speaker wires (red, black, blue, and white). Carefully move them away from the fan.

  8. Lift the fan off of the laptop. Lift the fan off of the laptop.
    • Lift the fan off of the laptop.

  9. Locate the three speakers within the laptop.
    • Locate the three speakers within the laptop.

    • The bass speaker is located near the fan's original position.

    • The side speakers are located at the upper left and right corners of the laptop.

  10. Using a Philips #1 screwdriver, remove the two 2.5 mm screws securing the bass speaker. Using a Philips #1 screwdriver, remove the two 2.5 mm screws securing the bass speaker. Using a Philips #1 screwdriver, remove the two 2.5 mm screws securing the bass speaker.
    • Using a Philips #1 screwdriver, remove the two 2.5 mm screws securing the bass speaker.

  11. Unplug the bass speaker from the motherboard. Unplug the bass speaker from the motherboard.
    • Unplug the bass speaker from the motherboard.

  12. Remove the bass speaker from the laptop. Remove the bass speaker from the laptop. Remove the bass speaker from the laptop.
    • Remove the bass speaker from the laptop.

  13. Using a Philips #1 screwdriver, Remove the 2.5 mm screw holding each side speaker to the laptop. Using a Philips #1 screwdriver, Remove the 2.5 mm screw holding each side speaker to the laptop. Using a Philips #1 screwdriver, Remove the 2.5 mm screw holding each side speaker to the laptop.
    • Using a Philips #1 screwdriver, Remove the 2.5 mm screw holding each side speaker to the laptop.

  14. Unplug the side speakers from the motherboard. Unplug the side speakers from the motherboard.
    • Unplug the side speakers from the motherboard.

  15. Remove the side speakers from the laptop. The red and black wires connect to the right speaker, and the blue and white wires connect to to the left speaker. The side speakers are independent from the bass speaker. It is possible to remove them without having to remove the bass speaker.
    • Remove the side speakers from the laptop.

      • The red and black wires connect to the right speaker, and the blue and white wires connect to to the left speaker.

      • The side speakers are independent from the bass speaker. It is possible to remove them without having to remove the bass speaker.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Andrew Tran

Üyelik tarihi: 21-01-2015

692 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-1, Maness Winter 2015 Cal Poly, Team 18-1, Maness Winter 2015 üyesi

CPSU-MANESS-W15S18G1

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 6

Son 30 Gün: 13

Her zaman: 2,223