Giriş

This guide will walk you through two basic steps: removing the back and removing the fan.

Parçalar

  1. Remove all twelve 6 mm screws from the back of the laptop using a Phillips #1 screwdriver.
    • Remove all twelve 6 mm screws from the back of the laptop using a Phillips #1 screwdriver.

      • Apply a lot of pressure to prevent the screws from stripping.

      • Make sure to turn off the computer first!

    Yorum Ekle

  2. Gently pull the back cover off the laptop. It should come off easily.
    • Gently pull the back cover off the laptop. It should come off easily.

    Yorum Ekle

    • Remove the three 3.5 mm screws from the fan with a Philips #1 screwdriver.

    Yorum Ekle

    • Pull the wire tabs up one at a time to separate them from the motherboard.

      • Do not pull too hard on the wire tabs. It may damage the connection between the wires and motherboard.

    Yorum Ekle

    • Remove the black and white antenna cables from the wireless card.

      • Do not pull too hard on the antenna cables, as it might damage the connection to the wireless card.

    Is the black and white wire the one connected to the screen?

    Emi Hua - Yanıt

    • Lift up the fan slightly.

    • Gather the antenna cables(black and white) and speaker wires (red, black, blue, and white). Carefully move them away from the fan.

    Yorum Ekle

    • Lift the fan off of the laptop.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 başka kişi bu kılavuzu tamamladı.

Vivian

Üyelik tarihi: 21-01-2015

302 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 18-1, Maness Winter 2015 Cal Poly, Team 18-1, Maness Winter 2015 üyesi

CPSU-MANESS-W15S18G1

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 12

Son 30 Gün: 44

Her zaman: 6,804