Eşyalarını Tamir Et Topluluk Mağaza

Lew's Mach Crush Speed Spool Disassembly

Giriş

Guide for disassembly to allow for repair, greasing, and cleaning of parts of baitcaster.

Neye ihtiyacın var

Öne Çıkan Belge

    • Refer to the featured document for specific part names and exploded view. Determine whether you have the right-handed or left-handed reel.

    Düzenle

  2. Lew's Mach Crush Speed Spool Disassembly, Remove Left-Side Cover: adım 2, 2 resimden 1. Lew's Mach Crush Speed Spool Disassembly, Remove Left-Side Cover: adım 2, 2 resimden 2.

    • Slide switch to 'open' on left side of reel to remove left cover.

    Düzenle

  3. Lew's Mach Crush Speed Spool Disassembly, Spool Assembly: adım 3, 1 resimden 1.

    • Remove the palm-side cover, then spool assembly from center frame of reel.

    Düzenle

  4. Lew's Mach Crush Speed Spool Disassembly, Lube-Port Screw: adım 4, 1 resimden 1.

    • Remove lube-port screw using small Phillips screwdriver.

    Düzenle

  5. Lew's Mach Crush Speed Spool Disassembly, Lube-Port Cover: adım 5, 1 resimden 1.

    • Remove cover off of lube-port.

    Düzenle

  7. Lew's Mach Crush Speed Spool Disassembly, Handle Screw: adım 6, 1 resimden 1.

    • Remove screw and handle nut from reel.

    Düzenle

  8. Lew's Mach Crush Speed Spool Disassembly, Removal of Handle: adım 7, 1 resimden 1.

    • Remove handle and handle nut retainer.

    Düzenle

  9. Lew's Mach Crush Speed Spool Disassembly, Drag-Dial: adım 8, 1 resimden 1.

    • Unscrew star-drag until it is loose, remove it and the handle washer from the shaft.

    • Note: You may have to hold the reels gears in place in order to unscrew the drag, as it will try to spin the gears.

    Düzenle

  10. Lew's Mach Crush Speed Spool Disassembly, Exterior Right-Cover Screws: adım 9, 1 resimden 1.

    • Remove three spool cover screws from reel.

    Düzenle

  11. Lew's Mach Crush Speed Spool Disassembly, Cap: adım 10, 1 resimden 1.

    • Remove cast control cap.

    Düzenle

  12. Lew's Mach Crush Speed Spool Disassembly, Removal of Right-Cover: adım 11, 1 resimden 1.

    • Pry 2 drag spring washers, and 1 click holder washer off to finish removing side cover.

    Düzenle

  13. Lew's Mach Crush Speed Spool Disassembly, Removal of Pinion: adım 12, 1 resimden 1.

    • Remove the pinion yoke and 2 pinion yoke springs

    Düzenle

  14. Lew's Mach Crush Speed Spool Disassembly, Removal of Main Gear: adım 13, 1 resimden 1.

    • Remove drive gear and accompanying drag and ratchet washers.

    Düzenle

  15. Lew's Mach Crush Speed Spool Disassembly, Apply Oil: adım 14, 1 resimden 1.

    • Apply oil to main gear if desired.

    Düzenle

  16. Lew's Mach Crush Speed Spool Disassembly, Make any necessary changes: adım 15, 1 resimden 1.

    • At this point, you have disassembled the reel enough to where you can clean parts, remove dust and debris , or replace individual parts

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Ekli Belgeler

Yazar

4 tane daha katılımcı ile

Rebecca Welch

Üyelik tarihi: 03/31/22

250 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 6

Son 30 gün: 21

Her zaman: 608