Ana içeriğe geç

Giriş

In this guide you will learn the basics for replacing the camera in the LexiBook Tablet One. This guide will include removing the battery. A plastic spudger and pencil may be useful for this guide.

Parçalar

Hiçbir parça belirtilmedi.

  1. Find the seam in the casing.  Insert the blue plastic opening tool, and slide to either side carefully undoing the clips.  The clips are hidden within the casing and are spaced roughly 1.5 in. apart. When opening the device, be wary of the speaker wire.  It is best to open the device from the right side with the camera oriented to the top. When opening the device, be wary of the speaker wire.  It is best to open the device from the right side with the camera oriented to the top.
    • Find the seam in the casing. Insert the blue plastic opening tool, and slide to either side carefully undoing the clips. The clips are hidden within the casing and are spaced roughly 1.5 in. apart.

    • When opening the device, be wary of the speaker wire. It is best to open the device from the right side with the camera oriented to the top.

  2. Insert a spudger between the speaker and the casing.  Gently pop the speaker out, and set the panel to the side. Insert a spudger between the speaker and the casing.  Gently pop the speaker out, and set the panel to the side.
    • Insert a spudger between the speaker and the casing. Gently pop the speaker out, and set the panel to the side.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Using a plastic spudger, wedge the tool between the battery and LCD. Repeatedly gouge and work around the edges of the battery until the adhesive breaks free.  You will have to apply generous pressure, as long as you push horizontally the components should not be further damaged.
    • Using a plastic spudger, wedge the tool between the battery and LCD. Repeatedly gouge and work around the edges of the battery until the adhesive breaks free. You will have to apply generous pressure, as long as you push horizontally the components should not be further damaged.

    • Be careful not to damage any wires or to puncture the battery casing when peeling the adhesive.

    • A similar flat tool can be used in place of a plastic spudger.

  5. Remove the ribbon cable leading to the camera by carefully using a flat headed tool to open the ribbon clip. Gently slide the ribbon cable out while holding the clip open. Gently slide the ribbon cable out while holding the clip open.
    • Remove the ribbon cable leading to the camera by carefully using a flat headed tool to open the ribbon clip.

    • Gently slide the ribbon cable out while holding the clip open.

  6. When inserting your new camera, maintain the clip's open position and slide the new ribbon cable in.
    • When inserting your new camera, maintain the clip's open position and slide the new ribbon cable in.

    • It is imperative the clip not close partially when installing the new ribbon, or the new cable can be damaged.

    • When the ribbon can go no further into the clip, close the clip.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jordan

Üyelik tarihi: 11-03-2015

618 İtibar

4 adet Kılavuz yazıldı

Takım

Colorado Springs, Team 2-5, Panko Spring 2015 Colorado Springs, Team 2-5, Panko Spring 2015 üyesi

UCCS-PANKO-S15S2G5

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 98