Eşyalarını Tamir Et Topluluk Mağaza

Linksys WAP54g Bottom Casing/Motherboard Replacement

Giriş

After the top casing is removed we can remove the bottom casing to isolate the motherboard.

Neye ihtiyacın var

  1. Linksys WAP54g Bottom Casing/Motherboard Replacement, Top Casing: adım 1, 1 resimden 1.

    • Power down and unplug the device.

    Düzenle

  2. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 2, 1 resimden 1.
    Düzenle

  3. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 3, 1 resimden 1.

    • Remove the two black rubber feet of the device using the screwdriver. The feet are located on the bottom towards the front.

    Düzenle

  5. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 4, 1 resimden 1.

    • Once the feet are removed, two small screws will be visible. With a small screwdriver, unscrew them. Screws are phillips head, 4.35 mm in diameter, 7.88 mm in length.

    Düzenle

  6. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 5, 1 resimden 1.

    • To remove the front blue panel, grip firmly and place thumbs in the two notches on top. Push thumbs forward while keeping a firm grip on bottom.

    • This may require a bit of force.

    Düzenle

  7. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 6, 1 resimden 1.

    • Now slide the bottom panel forward and remove it so the top casing is isolated from the bottom casing and motherboard.

    Düzenle

  8. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 7, 2 resimden 1. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 7, 2 resimden 2.

    • Unscrew the nut on the outer side of the back casing. Remove the nut and the washer from both antenna mounts.

    Düzenle

  9. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 8, 2 resimden 1. Linksys WAP54g Bottom Casing/Motherboard Replacement: adım 8, 2 resimden 2.

    • From here, remove the wires and nuts connected to the back panel by pulling the nuts through the holes.

    • Now the top casing has been removed and isolated from the rest of the device. From here, you can make repairs to the top casing.

    • Once the top panel is removed the main board will still be attached to the bottom panel.

    Düzenle

  10. Linksys WAP54g Bottom Casing/Motherboard Replacement, Bottom Casing/Motherboard: adım 9, 2 resimden 1. Linksys WAP54g Bottom Casing/Motherboard Replacement, Bottom Casing/Motherboard: adım 9, 2 resimden 2.

    • Unscrew the two screws that connect the motherboard to the bottom casing.

    • The motherboard and bottom casing should be completely separated at this point. This allows for replacement of the motherboard and/ or its components as well as the bottom casing.

    Düzenle
Sonuç

After the motherboard is isolated component level repairs can be made.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

6 tane daha katılımcı ile

Mathew Fuller

Üyelik tarihi: 10/04/11

146 İtibar

1 Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 21-21, Maness Fall 2011 Cal Poly, Team 21-21, Maness Fall 2011 üyesi

CPSU-MANESS-F11S21G21

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,582