Giriş

If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.

Parçalar

Hiçbir parçaya gerek yok.

Turn the device over so that the base is on top.
  • Turn the device over so that the base is on top.

Yorum Ekle

Peel off the piece of metal that is glued to hold the two halves of the base together.
  • Peel off the piece of metal that is glued to hold the two halves of the base together.

  • You may need rubber cement to reapply the piece of metal when reassembling the device.

Yorum Ekle

  • Unscrew the four 10mm Phillips head screws on the bottom of the device.

  • Once the base is removed, the device should look as shown on the picture.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nick Kaprielian

Üyelik tarihi: 14-01-2014

495 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 üyesi

CPSU-FORTE-W14S17G3

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 359