Ana içeriğe geç

Lite-On iHAS324 Chassis Replacement

Neye ihtiyacın var

  1. Lite-On iHAS324 Chassis Replacement, Chassis: adım 1, 2 resimden 1. Lite-On iHAS324 Chassis Replacement, Chassis: adım 1, 2 resimden 2.
    • Insert a paper clip into a small hole on the right side of the faceplate bellow the disc tray.

    • There may be resistance, do not be afraid to use force.

    • The tray should then pop open.

    • Pull out the tray so that it is fully extended.

  2. Lite-On iHAS324 Chassis Replacement: adım 2, 3 resimden 1. Lite-On iHAS324 Chassis Replacement: adım 2, 3 resimden 2. Lite-On iHAS324 Chassis Replacement: adım 2, 3 resimden 3.
    • Use a plastic opening tool to push the three tabs located on the right, left, and bottom side of the outer chassis to loosen the faceplate off.

  3. Lite-On iHAS324 Chassis Replacement: adım 3, 1 resimden 1.
    • Pull the faceplate off the chassis.

    • Do NOT pull the faceplate all the way off the disc tray, because doing so can cause damage to the faceplate.

    • There may be resistance, do not be afraid to use force.

  4. Lite-On iHAS324 Chassis Replacement: adım 4, 1 resimden 1.
    • Using the Phillips Head #2 screwdriver, unscrew the two 8.5 mm screws located on the bottom back of the chassis.

  5. Lite-On iHAS324 Chassis Replacement: adım 5, 1 resimden 1.
    • Remove the bottom plate by lifting it off the device.

  6. Lite-On iHAS324 Chassis Replacement: adım 6, 1 resimden 1.
    • Turn the device over.

    • Remove the top plate by pulling the sides and lifting the plate off.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Kayla Culpepper

Üyelik tarihi: 03/22/15

675 İtibar

5 adet Kılavuz yazıldı

Ekip

Baylor, Team 5-9, Williams Spring 2015 Baylor, Team 5-9, Williams Spring 2015 üyesi

BU-WILLIAMS-S15S5G9

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 11

Her zaman: 1,274